Propane Heater Buying Guide

Three questions decide almost every propane heater purchase: does it vent, where does it mount, and how much heat does the room actually need.

Polson Propane heating products banner
Start here

What to work out before you shop

You do not need to become an expert. You do need four facts about the room, and then the choice narrows itself down.

How big is the room?

Length and width, ceiling height, and whether it is open to the rest of the house through a wide doorway.

How well is it sealed?

Insulation, window area, outside walls and how often the door opens all change how much heat the room loses.

Where can it vent?

An outside wall, a roof, an existing flue — or nowhere at all. This is often the deciding factor.

What happens in an outage?

If you want heat when the power is out, look for a millivolt or hydraulic thermostat and skip anything that depends on a fan.

Vented or vent-free

The first real decision

Vented appliances send exhaust outside. Vent-free appliances do not, and every one we order includes an oxygen depletion sensor.

Vented and vent-free propane heaters compared
  Vented Vent-free
How it works Combustion gases leave the room through a vent or a wall terminal. Burns cleanly with no flue, using an oxygen depletion sensor as a safety backup.
Where it can go Needs access to an outside wall, a roof vent or an existing flue. No vent required, which suits rooms where running a vent is impractical.
Direct vent type Heats with outside air and vents it back out, so warmed indoor air stays indoors. Uses the air already in the room, so room size matters.
Power outages Millivolt and hydraulic thermostats need no electricity; an optional blower does. Several Rinnai models are designed to run without electricity, including thermostat versions.
Examples we order Empire DV direct vent heaters, RH consoles, Visual Flame, cast iron stoves, direct vent fireplaces, Rinnai EnergySaver furnaces. Rinnai Azure blue flame, Rinnai Equator, Bantam, Tropic and Glo-Ray infra-red, Rinnai Silent Servant.

Which one do most of our customers choose?

If there is an outside wall or a roof available, a vented or direct vent appliance is usually the simplest long-term answer. If there is no practical way to vent, the vent-free Rinnai line covers everything from a bathroom to a mid-size living area.

Venting styles

Direct vent, gravity or counterflow?

These three names come up constantly, and they describe how the appliance gets air, where it mounts and how the heat moves into the room.

Direct vent

A sealed system that draws combustion air from outside and vents exhaust back out through the same wall terminal. No chimney, and no warmed room air pulled up a flue.

Direct vent automatic heaters

Gravity

Warm air rises off the heat exchanger and circulates on its own, with no blower. Needs access to a roof vent, and millivolt thermostats mean no electricity.

Gravity wall furnaces

Counterflow

A blower pushes warm air out near the floor so it spreads across the room instead of collecting at the ceiling. Very space-efficient.

Counterflow wall furnaces

Wall furnace, room heater or fireplace?

A wall furnace is built to carry the heating load of a room or a small home. A room heater is a supplement — something that takes the chill off a space you use most. A fireplace or stove is a supplement too, but it is also a focal point you look at all evening.

Two useful extras

An optional blower spreads heat around the room instead of letting it stack near the ceiling, and a wall thermostat lets you set a temperature and forget it. If you want heat during a power outage, remember that the blower is the part that needs electricity.

How many BTUs?

Matching capacity to the room

There is no single formula that works for every house, because insulation, ceiling height and window area all change the answer. Use the published capacities below as a starting point, then tell us about the room and we will narrow it down.

Typical propane heater capacities we special-order, by room
The room What to look for Typical options
Bedroom, bathroom or workroom The smallest zone heaters, mounted out of the way Empire DV-210 at 10,000 Btu or DV-215 at 15,000 Btu; Rinnai Equator at 5,000-10,000 BTUs
Study, office or medium room Mid-size zone heat, with a thermostat you can leave alone Empire DV-25 at 25,000 Btu or DV-35 at 35,000 Btu; RH-25 and RH-35 console heaters; Rinnai Tropic at 6,500-30,000 BTUs
Living area or open plan More capacity, and a blower to move the air Empire DV-40E at 40,000 Btu or DV-55E at 55,000 Btu; Rinnai Bantam at 8,500-25,000 BTUs; Rinnai Silent Servant
Large room, cabin or shop The biggest vented units, or a unit with a floor-level blower Empire RH-50B at 50,000 Btu or RH-65B at 65,000 Btu; DV-55 and FAW-55 counterflow furnaces
Nowhere to vent Vent-free radiant or convection heat, matched to the room Rinnai Azure at 10,000-20,000 BTUs; Rinnai infra-red heaters; Rinnai Silent Servant

Safety comes before capacity

Never oversize a vent-free appliance for the room it serves. Follow the manufacturer's installation instructions and clearances exactly, keep vents and air openings clear, and have your propane system checked if you are not sure it is working the way it should. Our GASCheck safety inspection covers the tank, the lines and the appliances, and the propane safety page explains what to do if you ever smell gas.

Browse all heating products The Rinnai heater line

Common questions

Propane heater questions we hear most

Do I need electricity to run a propane heater?

Not necessarily. Heaters with a millivolt wall thermostat or a hydraulic thermostat need no household electricity at all, and several Rinnai vent-free models are built to run in a power outage. A blower or fan is the part that needs current, so if outage heat matters most, plan on running without one.

Can I install a gas heater myself?

Empire builds its gas zone heating appliances for do-it-yourself installation, and we are glad to talk you through venting, clearances and start-up. Gas piping and connections are another matter — check what your local code and your comfort level require, and call us if you would rather have the work done for you.

Vented or vent-free — which is better?

Neither is universally better. If you can vent through an outside wall or a roof, a vented or direct vent appliance usually gives you the widest capacity range and keeps combustion air and exhaust out of the living space. If venting is impractical, a vent-free Rinnai heater is the sensible answer. Read the heating products overview for the full list.

How do I know what size heater to buy?

Start with the room's dimensions and how well it is insulated, then compare against the published capacities in the table above. Tell us the room size, the ceiling height, how many outside walls and windows it has, and how cold it gets, and we will point you at the model families that fit.

Do you stock these heaters at the plant?

We special-order them from Empire Comfort Systems and Rinnai. Because new models are introduced all the time, the honest answer is always the same: call 406-883-3588 for the latest information and a quote, and we will confirm the current model, price and lead time.

Ask us before you buy

We would rather spend ten minutes on the phone than have you order the wrong heater. Call 406-883-3588, email info@polsonpropane.com, or stop by the plant at 63101 Highway 93 in Polson. You can also send us a message or read more about heating products.

Ready for propane service you can count on?

Call the plant, place an order online, or stop by on Highway 93 just north of Rocky Point Road. We serve Polson, Bigfork, Lakeside, Ronan, Pablo and the southern Flathead Valley.